|Sherman Oaks Pool Filter Repair Tips
Cleaning a diatomaceous pool filter requires care and attention as operating under high pressure presents a safety hazard. Therefore, we recommend hiring a professional to be on-site while performing this procedure for the first time. Our method is to first turn off the power to the equipment - insure there is no electricity going to the timeclock by turning off the circuit breaker at the Main Service Panel. When the system is off, open the filter and remove the grid assembly. For best cleaning, dismantle the grid pack completely and take note of the arrangement so that you can reassemble it properly. Wash down the each dirty panel with a garden hose until clean. Insert the gridpak back into the tank and lube the orings - this will help prevent leaks when the system is powered back up. Be sure to tighten the tank clamp according to the manufacturers instructions to secure a good fit. For safety, always stand back from the filter when the system is being repressurized. For our neighbors in Sherman Oaks, pool filter repair and cleaning is sometimes more than a homeowner would care to venture into. Not to worry, as you have a team of experienced techs who are ready to handle whatever it ailing your system today. Just let us know how we can assist you - for cleaning, troubleshooting, or repair or installation, we're here for you!